For smaller items use the "TOP HINGE METHOD" for larger or long decals use the "CENTER HINGE METHOD"
• When working with larger decals a second set of hands would be helpful.. and more fun.
• The tool should be angled 45 degrees away from the center of the decal. This will keep bubbles from forming between the decal and the surface.
• To remove any small air bubbles on a large surface that formed during installation, simply poke (using a needle, safety pin, or a stick pen) on the side of the bubble and push the air out starting at the opposite side of the hole.
SEND US A PHOTO GET A GIFT!!
We love to see our wall decals up on your wall!! Share your new piece of art with us and we will send you a cool gift!! Simply email us some photos or post some photos on our fan page facebook.com/graphicsmesh and we will take it from there. Your photos might be posted or re-posted on our website or other social media networks.
Environment and surface temperature must be at least 68 °F (+20 °) before these wall decals can be removed. Using a knife (or a pen with a needle point), first lift up cautiously one corner of the decal. Then slowly draw the decal from the surface at a 180° angle. Heating the decal with a hot air gun or a hair dryer (on high heat) while pulling makes removal considerably easier. If the decals being removed are very old, a small amount of residue from the adhesive may remain on the surface, in such cases you can use a varnish thinner to remove any residue easily.